Sous vide with a digital deep fryer element?

Discussion in 'Food & Cooking' started by eastshores, Sep 18, 2013.

  1. eastshores

    eastshores

    Messages:
    1,459
    Likes Received:
    303
    Exp:
    I Just Like Food
    I just got around to cleaning a deep fryer I've had forever and it occurred to me that maybe it could be used as part of an immersion circulator? I've seen pumps online that can handle circulating the water, would the heating element along with the thermostat that is built into the fryers element work to heat water? Here's what mine basically looks like:

     
  2. french fries

    french fries

    Messages:
    5,218
    Likes Received:
    327
    Exp:
    At home cook
    I'm sure it would heat water, but the issue would be to keep the temperature within a narrow range... I don't think your deep fryer would be very good at that... but I've never tried, and it sounds like you may be in a position to try!

    Been meaning to try sous-vide ... one of those days. 
     
    Last edited: Sep 18, 2013
  3. eastshores

    eastshores

    Messages:
    1,459
    Likes Received:
    303
    Exp:
    I Just Like Food
    Yea I know it's critical to keep it exact and that's what I was asking to see if anyone had tried. This fryer has a digital thermometer that controls the element which is just like the DIY setups I've seen. The question is, how accurately?
     
  4. dcarch

    dcarch

    Messages:
    595
    Likes Received:
    69
    Exp:
    Home Cook
    Digital is not good enough.

    You need a PID controlled digital thermostat.

    A PID controller can "learn" (auto ranging) the thermal characteristics of your entire system, and make adjustments to compensate to stay within a very narrow temperature range.

    A PID controller can be less than $20.

    dcarch
     
    french fries likes this.
  5. french fries

    french fries

    Messages:
    5,218
    Likes Received:
    327
    Exp:
    At home cook
    DCarch, can you use any PID controller? Or do you need one that is specifically designed for sous-vide cooking? Can you recommend one by any chance? Thanks!
     
  6. eastshores

    eastshores

    Messages:
    1,459
    Likes Received:
    303
    Exp:
    I Just Like Food
    Thanks, yea I was extremely surprised at how cheap the controllers were. Nice ones too. One day I'll get around to putting one together!
     
  7. dcarch

    dcarch

    Messages:
    595
    Likes Received:
    69
    Exp:
    Home Cook
    Number one, you should not try anything unless you understand electric power wiring and grounding. Or you will be cooked instead of the food.

    PID controllers some have relay contact outputs, and some have power out for a solid state relay (SSR). You will need to set the fryer's thermostat to the highest temperature and plug the fryer into a PID controlled SSR and let the SSR to turn the heating element on and off. 

    The ones have only relay outputs will need a low DC voltage supply to drive a SSR.

    Go on ebay, you will find a ton of PID controllers, make sure they come with a temperature sensor or you can buy the sensor separate (type K)

    Buy a SSR rated high enough in wattage handling capacity (less than $10).

    dcarch
     
    Last edited: Sep 18, 2013